diamond wire saw for granite, diamond wire saw for granite

The static cutting of diamond wire cutting is also called non-prejudice demolish which is newly developed in recent years. The new static demolish is an environmental, high-efficient, safe cutting technique which is a specially designed for cutting and separating large steel reinforced concrete or stone block at quarry. By

Featured Products

The static cutting of diamond wire cutting is also called non-prejudice demolish which is newly developed in recent years. The new static demolish is an environmental, high-efficient, safe cutting technique which is a specially designed for cutting and separating large steel reinforced concrete or stone block at quarry. By the high-speed drive from oil hydraulic motor, the diamond wire saw with certain amount diamond beads on it surround cut the object. Under certain tension, the wire saw grind and cut the objects, and the chipping and heat is took away with cooling water, the concrete and stone block are separated into several parts in this way finally.

Diamond Wire Saw for Granite, Granite Diamond Wire Saw

Quarry wire saw 
1. safe and eco-friendly. 
2. For granite quarry, we recommend rubber wire, it can protect the wire rope and increase the wire's strength.
3. Spring and rubber diamond wire saw is widely used for marble quarry.

Diameter (mm)ConnectionBeads/meterWire Speed(m/s)
φ11rubber4020~30
φ11.5rubber4020~30
φ11 spring28/30/3225~35 
rubber40
φ12spring3225~35

Squaring,Profile Wire Saw
1.The use of diamond wire for stone profiling, with narrow kerf width and high quality cable insure less breakage and good tension, bring better performance in tough environment.
2.This product works in low noise, safe and eco-friendly.
Diameter (mm)ConnectionBeads/MeterWire Speed(m/s)
φ10Plastic3720~30
Rubber40
φ10.5Plastic3720~30
Rubber40
φ11Plastic3720~30
Rubber40
φ8.8Plastic3225~35
φ8.2
φ7.2

 


Multi-Wire Saw
Suitable for cutting the different kinds of large granite or sandstone.
Advantage: high cutting efficiency, get the even and smooth slab, low power consumption and less materials waste.
Diameter (mm)ConnectionBeads/MeterWire Speed(m/s)
φ7.2Plastic3720~25
φ8.2


Concrete Wire Saw 
1. Widely used for demolition of house, bridge, big post, cement pipes and under water buildings.
2. Advantage: cutting direction can be controlled, low vibration, low noise, no dust, control cutting at a far distance.
Diameter    (mm)ConnectionBeads/meterWire Speed(m/s)
φ10.2Rubber+ Spring4020~25
φ10.5
φ11
φ11.5



The feature of ChinShine diamond wire cutting rope:
1. Since the diamond grits are took as the grinding material, any hard material can be cut and separated;
2. The diamond wire saw moves and works by the power of hydraulic motor, the steady and smoothly running hydraulic pump remotely control the hydraulic motor by high-pressure pipeline, therefore, the vibration and noise can be minimized farthest, and the concrete can be statically cut and separated in stationary state;
3. By using diamond wire saw, you can cut stone or concrete without a shape and size limit, the wire saw can cut the them from any direction like diagonal, vertical and horizontal;
4. By feeding cooling water, the run up wire saw can be cooled down during cutting, and the chips will be took away by the water which can be recycle-used;
5. The fast cutting speed and large power is the greatest advantage of diamond wire cutting marble which is incomparable. 
Diamond Wire Saw for Granite, Granite Diamond Wire Saw

Why buy diamond wire saw cutting and diamond wire cutting rope for sale from ChinShine?

* ChinShine diamond wire for marble cutting have been market tested for over 12 countries.

* Compared with most suppliers, we could ensure that our cutting efficiency is increased  at  least 20%

* 24 hours response.

* Professional technical support and solution.

* Direct communication with engineers.

* Best after-sale service. 
Diamond Wire Saw for Granite, Granite Diamond Wire SawDiamond Wire Saw for Granite, Granite Diamond Wire Saw

Diamond Wire Saw for Granite, Granite Diamond Wire Saw

Manufacturer

 Diamond Wire Saw for Granite, Granite Diamond Wire SawDiamond Wire Saw for Granite, Granite Diamond Wire SawDiamond Wire Saw for Granite, Granite Diamond Wire Saw

Packaging

  Diamond Wire Saw for Granite, Granite Diamond Wire Saw

Company Culture

 Diamond Wire Saw for Granite, Granite Diamond Wire Saw

 

Testimonial

 

I bought different blades and segments from "XX" and you, the 350mm blades bought from xxx(other supplier) falling off segments, however the segments we bought from you for our 3000mm blade are very good and we are happy with them, I will be putting in an order for more segments in two weeks time, I will definitely buy your blades, thank you for providing such good segments for us.

--Maci** from Poland

 

"Congratulations, after the evaluation of all the saw blade supplier, we are very happy with your quality. You will become our important supplier. Now, we ask you to specify the lead time of production for orders of 400 blades, send me the total price, invoice please."
--Lore** from Italy

"Mikayla and company, you have always been true and honorable to your word. It has been a pleasure dealing with you in this past year.
I look forward to many more years to come."

--Mr.Wall Canada

 

Contact

 Website: http://diamondsegments.en.made-in-china.com
Website: http://diamondsegments.en.made-in-china.com
   
   
   
   
   

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours